BYGCF - METEC 4080C
- MSDS: BYGCF
- Manufacturer: METALLURGICAL TECHNOLOGIES INC
- Product Name: METEC 4080C
- National Stock Number: 3439-01-392-7039
Product Identification
Product ID:METEC 4080C
MSDS Date:03/21/1994
FSC:3439
NIIN:01-392-7039
MSDS Number: BYGCF
Responsible Party
PEARLAND, TX 77581
US
Emergency Phone: 713-485-7765
Info Phone: 713-485-7765
Cage: 63726
Contractor
Telephone: 713-485-7765
Cage: 63726
Ingredients
TUNGSTEN CARBIDE
CAS: 12070-12-1
RTECS: YO7250000
Fraction By Weight: 44%
OSHA PEL 5 MG W/M3
ACGIH TLV: 5 MG W/M3
NICKEL
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 40.2%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3
COBALT
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 6%
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3
CHROMIUM
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 65.25%
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 1.5%
ALUMINUM
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 0.7%
ACGIH TLV: 10 MG/M3
BORON
CAS: 7440-42-8
RTECS: ED7350000
Fraction By Weight: 1.0%
OSHA PEL 10 MG B203/M3
ACGIH TLV: 10 MG B2O3/M3
Fire Fighting
Flash Point:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:GRAPHITE, DOLOMITE OR SODIUM CHLORIDE.
Fire Fighting Procedures:DO NOT USE WATER.
Unusual Fire/Explosion Hazard:NOT CONSIDERED FLAMMABLE; HOWEVER, FINELY
DIVIDED POWDER IN THE FORM OF A DUST CLOUD CAN IGNITE IF CONTACTED
BY AN IGNITION SOURCE.
Exposure Controls
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:2000F,1093C
Decomp Temp:Decomp Text:NA
Vapor Pres:1 MM
Vapor Density:NA
Spec Gravity:9.8
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:METALLIC GREY POWDER.
Percent Volatiles by Volume:NA
Corrosion Rate:NA
Stability
Stability Indicator/Materials to Avoid:YES
PURE OXYGEN OR OTHER OXIDIZERS.
Stability Condition to Avoid:GENERATION OF AIRBORNE DUST.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.